Our logo is not the only ‘green’ part of IMS!
RoHS versions of nearly all IMS products are available upon request, with the exception of nickel barrier parts, which are fully RoHS. See below for the low down on each IMS product line.
For more information view our content data page or our RoHS compliancy statement.
|
|
|
Resistors
|
| N-Series |
The –3 (PtAg with no solder) is RoHS compliant by design
The -7 is (PtAu with Au overcoat) is RoHS compliant by design
The –C (PtAg with solder) can be RoHS compliant upon request by using 96/4 solder (Specify -P)* |
| IMS Series |
The -0 (PdAg) is RoHS compliant by design
The -2 (PdAg with solder) is not RoHS compliant
The –1 is RoHS compliant
The –3 (PtAg with no solder) is RoHS compliant by design
The –C (PtAg with solder) can be RoHS compliant upon request by using 96/4 solder (Specify -P)* |
| IMS Power Series |
The –1 (gold terminations) is RoHS compliant by design
The –3 (PtAg with no solder) is RoHS by design
The –C (PtAg with solder) can be RoHS upon request by using 96/4 solder (Specify -P)*
|
| RCX Series |
The –1 (gold terminations) is RoHS compliant by design
The –3 (PtAg with no solder) is RoHS compliant by design
The –C (PtAg with solder) can be RoHS compliant upon request by using 96/4 solder (Specify -P)* |
| Super RCX Series |
The –1 (gold terminations) is RoHS compliant by design
The –3 (PtAg with no solder) is RoHS compliant by design
The –C (PtAg with solder) can be RoHS compliant upon request by using 96/4 solder (Specify -P)* |
| RCX PW Series |
The –3 (PtAg with no solder) is RoHS compliant by design
The –C (PtAg with solder) can be RoHS compliant upon request by using 96/4 solder (Specify -P)*
The -4 (PtAu) is RoHS compliant by design
The -D (PtAu with solder coating) is not RoHS compliant |
| RXI Series |
Fully RoHS by design
|
| TPI Series |
Fully RoHS by design
|
|
Terminations
|
| N-Series |
The –3 (PtAg with no solder) is RoHS compliant by design
The -7 is (PtAu with Au overcoat) is RoHS compliant by design
The –C (PtAg with solder) can be RoHS compliant upon request by using 96/4 solder (Specify -P)* |
|
Attenuators
|
| A-Series |
Fully RoHS compliant by design
|
| IMS1141 |
Fully RoHS compliant by design
|
| IAX Series |
The –1 (gold terminations) is RoHS compliant by design
The –3 (PtAg with no solder) is RoHS compliant by design
The –C (PtAg with solder) can be RoHS compliant upon request by using 96/4 solder (Specify -P)* |
| IMA Series |
The PtAg with no solder is RoHS compliant by design The PtAg with solder can be RoHS compliant upon request by using 96/4 solder* |
| V- Series |
The –3 (PtAg with no solder) is RoHS by design
The –C (PtAg with solder) can be RoHS upon request by using 96/4 solder (Specify -P)* |
|
Filters
|
| IMF Series |
Fully RoHS by design |
|
Dividers and Splitters
|
| IMD Series |
Fully RoHS by design |
| IPS Series |
Fully RoHS by design |
| IMK2549 |
Fully RoHS by design |
|
Thermal Management Devices
|
| B Series |
The –3 (PtAg with no solder) is RoHS compliant by design The –C (PtAg with solder) can be RoHS compliant upon request by using 96/4 solder (Specify -P) |
| P Series |
The –3 (PtAg with no solder) is RoHS compliant by design
The –C (PtAg with solder) can be RoHS compliant upon request by using 96/4 solder (Specify -P) |
| * May alter performance specifications |